Showing posts with label Hot Wheels. Show all posts
Showing posts with label Hot Wheels. Show all posts

Tuesday, December 4, 2012

Boxing up the Toyota Baja Truck

In 2000 Hot Wheels added an off-road racing legend to their lineup, the Toyota Baja Truck. While being a gorgeous casting some of HW's design decisions left me wanting. I never need much of excuse to swap out the wheels on almost any Hot Wheels model, while they function very well, few of the designs really tickle my fancy. My other major complaint is the goofy looking spare tire floating in the back of the truck. This had to go for two reasons, one, the wheel was not going to match the new wheels for the truck and secondly, that thing is just plain goofy looking.

In my search for some new wheels for the 'Yota I spotted a suitable donor, in fact I had found something much more. My prospective donor was none other than the Baja Bullet desert truck from Matchbox. This truck features a much more modern set up for not only the spare tire but also the engine compartment and cooling fans.

After pulling both trucks apart I began cutting away at the interior/bed of the MBX, VERY SLOWLY. What is cut can not be un-cut, so I took my sweet time and checked my fitment after every cut. After a significant amount of cutting to the interior/bed and a small piece cut off of the Toyota's bed the truck was almost finished. I was happy that I was able to fit the important parts of the roll-cage back into the truck and keep the front bumper. The original interior of the Toyota was mostly ground away but surprisingly the HW retained all of its original pieces (well, not the wheels of course).

The proof, of course, is in the pudding, eh, pictures. Check it out and you be the judge. My verdict, awesome!



Monday, December 3, 2012

One HOT Willy's Jeep

The old flat fender Willy's Jeep is a highly revered classic. The Matchbox model is truly beautiful. But what I wanted to do was make my Willy's ready to tackle the terrain and eat boulders for breakfast. Originally I set about fabricating a roll cage from brass rod, meticulously filing and soldering away. At first things were going well and I was making steady progress. But then I pushed my luck and poof! It all went to hell. In the days that followed I wrestled with the idea a approaching the cage again, but the something new presented itself.

I was looking at my spare parts and I found a roll-cage I had left over from a recently sacrificed HW FJ40. With a few snips from my nippers I was delighted to find that the roll-cage was a perfect fit in my old Jeep. Awesome!

Next I need to fit some bigger cleats under the fenders. At first I was worried that this would take some heavy cutting and axle fabrication. But once again I was pleasantly surprised. With only six small cuts to the chassis and a bit of the old sanding wheel on the ends of the rear fenders I was able to fit some monstrous MBX wheels.

The end result was fantastic. This truck looks like it was meant to be this way. It looks like it could have shipped straight from the factory! And the best part of all? It was easy as pie.



Tuesday, November 13, 2012

Heating up the MBX FJ40

The Matchbox casting of the 1968 Toyota Land Cruiser FJ40 is outstanding.  The level of detail immediately made this one of my favorite casting and I own quite a few of them now.  You've seen me add a lift kit to my safari FJ40 in the past, here.  This time I wanted to go for something a bit more subtle.

I started by cracking apart two different Land Cruisers, one from Matchbox and the other, the custom FJ40 from Hot Wheels.  The goal, to get the tube bumper off the HW FJ and put it on the MBX.  The nice thing about this swap is that the chassis are very close in dimension, but this is where the niceness ends.  So, I tossed the MBX chassis and the HW wheels and got to work opening the back of the HW chassis to accommodate the tab cast into the back of the MBX FJ.  Using my Dremel and a cutting tool, and keeping the old chassis nearby for reference this went pretty smoothly.  As always, go slow and take a little material at a time, you can't easily put back what is now gone.  Then came the bumper, I did not want to make any modifications to the casting itself, so this meant that I needed to cut a channel behind the bumper to allow the body to recede into it a bit, this was the dangerous part, if I cut to deep I would chop off the very bumper I was trying to mount!  Fitment of the interior/bumper was still a bit of a problem and I needed to cut and grind some internal structure both on the interior/bumper and on the chassis itself.  After that was fitting properly I used my Dremel and cut-off wheel to remove the rear of the original interior, this, with some trimming, would help hold the axle in place and keep the windows where they belonged.

To top it all of I added one of my model truckers, which consequently would not have fit in the cast Matchbox interior.  Now my FJ40 is ready to hit the trails and is still quite street-able.  Pretty sweet.  Anyway, take a look at the photos and judge for yourself.





Friday, April 27, 2012

The Disarmed Tucker Torpedo

I was happy to find a Tucker Torpedo from the new Hot Wheels Boulevard series the other day.  Produced in 1947 and 48 the Tucker Sedan was a true innovation.  Featuring a rear mounted water-cooled horizontal 6 that powered the rear wheels, four-wheel independent suspension, disk brakes, seat belts and a padded dashboard, and numerous other previously unheard-of safety features, the Tucker was the metaphorical 'Torpedo' aimed at the short comings of the 'Big 3' automakers.  The 1988 movie 'Tucker: the Man and His Dream' is a great movie about this chapter of Preston Tucker's life and is well worth watching.  This is actually the first Tucker Torpedo that I have found and I am happy to have such a classic in my collection.




Friday, March 30, 2012

Can You Hear The Wind?

In 2010 Jun Imai captured the Mazda Furai as one of Hot Wheels new models.  Though only a concept car the Furai is a fully functional car featuring a 3-rotor Wankel motor pumping out 450bhp and has been put through it's paces on various race tracks including Laguna Seca. I think the Furai was well deserving of some racing shoes. Zoom Zoom.


Thursday, March 29, 2012

Real Riders on One Hot Jeep Scrambler

Cruising Wal-mart the other day and I came across this awesome Larry Wood Jeep Scrambler from Hot Wheels new Hot Ones series.  I did have to put some Real Riders on to bring back the off-road appeal.  Overall, a very cool truck, a new favorite.


Tuesday, March 27, 2012

The Datsun Bluebird 510: Soaring with Eagles

Known as the 'poor mans BMW' the Datsun Bluebird 5120 has a die-hard following even to this day.  Hot Wheels 2012 Faster Than Ever series introduces an awesome Datsun Bluebird 510.  Jun Imai really captured the excitement of this little sports coupe and I am happy to be able to add this latest paint scheme to my collection.  I do have one issue though.  Many of you may share my sentiment when I say, the new Faster Than Ever wheels are, indeed, uglier than ever.  It is with much rejoicing and no sorrow that I can show off the Datsun 510 with its new wheels and I shiny new set of Goodyear Eagles.

Saturday, March 24, 2012

Is it a Crime?

I really like the graphics on the Hot Wheels 2009 Ford F-150, but a question remains.  Is it criminal to load up some Matchbox wheels underneath?  If so I'm guilty as charged, but she sure is a beauty.

Friday, March 23, 2012

Real Rubber on a Hemi Challenger

I love collecting cars with racing graphics.  In the case of the '70 Dodge Hemi Challenger this only makes a good thing even better.  A perfect example is the Challenger from the 2010 Hot Wheels Mystery series.  The only thing missing was some nice racing rubber to help keep the shiny side up.

Some sweet Goodyear Eagle tires donated by an old Revell stock car finishes things off nicely.

Wednesday, March 21, 2012

Livening Up the Dewart Lancer Evo X

The Dewart 2008 Mitsubishi Lancer Evolution X appeared in the 2009 Hot Wheels Faster Than Ever series.  Unfortunately I do not have a white version (if you are willing to part with one or two send me an email), but that doesn't mean I can't spruce up the dark red version I do have. 

After I had the car drilled and Dremel'd I started things off by swapping out the funky tinted windows for some nice clear ones.  Next I ditched those FTE wheels for some chrome Y5's.  Last but not least was a Z-bar to give it that mid-drift look.  Sweet.

Tuesday, March 20, 2012

Monday, March 19, 2012

Swap Shop - '70 Camaro Road Race

In the late sixties a road racing series began in the United States.  While the muscle cars dominated the straight line of the quarter mile, these road racers had to due something that muscle cars were notoriously bad at - turn.  Even today there are some who would think that a smaller engine, bigger brakes and a bigger suspension is just lunacy, it was the perfect recipe for what became perhaps the greatest road racing series this side of the Atlantic - the Trans-Am.

For 2011 Dave Weise put together the '70 Camaro Road Race.  Based on the 1970 Chevrolet Camaro Z/28 race car, built in the Trans-Am's golden era, to take on Ford's Boss 302 Mustang which began dominating the Trans Am race series in '69.  I think DW did a great job in capturing the spirit of one of the US's greatest road racing cars.

In line with its racing heritage I swapped in some wheels from an old Racing Champions NASCAR model I scored off of ebay a while back. Oh yeah, she's a real looker now!

Monday, March 12, 2012

Z Bar Drift Battle!

I spent some time making Z-bars for a couple of my drift cars today so I figured that a battle was in order.

On the first pass the Hot Wheels Nissan 350Z started things off.  For the second pass the Hot Wheels 24/Seven custom Mazda RX-7 took the lead.

Sunday, March 11, 2012

You can Countach on it!

Check out the new kicks on my Lamborghini Countach!  The Johnny Lightning wheels really spruce up the Hot Wheels casting.


I really like the racing tampos but I think this one needs a spoiler.  Or should it get two ala Cannonball Run?

Saturday, March 3, 2012

Z Barring the Evo X

After watching a video from one of my favorite peeps on YouTube I decided to give it a shot myself.  'Give what a shot?', you say.  Well making my very own Z bar, of course!

I decided to test it out on a Hot Wheels Mitsubishi Lancer Evolution X that I had in my parts box.  I thought the Z bar would be the perfect thing to give my drift cars the look of counter-steering through the corners.  Check it out and let me know what you think.


To see how I did it, you can watch the video that inspired me here.  The only thing I did differently was to use  .032 brass rod for the axles.  For some reason I didn't need any superglue because the crimp tubes had a pretty snug fit on the brass rod, maybe just a fluke.

Friday, March 2, 2012

Breaking Baja

I have a kind of love-hate thing with the Hot Wheels Baja Breaker.  I love the off-road van schtick and the little details like the round portholes and window louvers.  The thing I don't like, nah, even hate is that the axles always seem to be way too long.  When the wheels stick almost completely outside of the wheel-well it is not a pretty thing.

So after drilling and tapping (an all that) I opened up the Baja Breaker and I face another problem.  In most modern die-cast that I have worked on there are posts that hold down the axles in addition to the small clips folded over the axles.  The Baja Breaker is an exception, the only thing retaining the axles are the plastic clips folded over the axles.  This required a bit of ginger manipulation but I was able to flex the chassis enough to squeeze the axles past the clips.  Truth be told I would be reluctant to perform a swap on one of these in the future unless I could find a more sure-fire way to secure the axles.

So here you have it, the Baja Breaker with some nice Matchbox wheels.  A thing of beauty.

Tuesday, February 28, 2012

Swap Shop: Land Cruiser FJ40 & Sahara Survivor

I always love it when a wheel swap goes well.  I love it all the more when a wheel swap goes both ways.

Having just picked up a few of the 2011 Hot Wheels Toyota Land Cruiser FJ40s I knew at least one of them was going to get some new shoes.  Introduced in 2010 from designer Jun Imai (think Sandblaster) this new FJ40 is a great example of an outfitted desert racer.  There was of course one complaint, the wheels.

After swapping in some wheels from a Matchbox Sahara Survivor I was pleased with the result.  Just for grins I fitted the axles and wheels into the Sahara Survivor and I was quite surprised to find that they were a really nice fit and actually look pretty darn cool. What do you think?

Monday, February 27, 2012

Did Sombody Order Fish'd & Chip'd?

Even before I put my fingers to the keys today something dawned on me.  I may have inadvertently made February, Fraser Campbell month.  Not that that is such a bad thing, at least his name begins with the letter F.  But for the record, this was all just a bit coincidence.

I recently came across the 2011 Hot Wheels Heat Fleet version of Fraser Campbell's Fish'd & Chip'd.  I love the overall look of the car and the interior has some great details that really add some character.  The satin blue paint with the red flame-job is very tastefully done and other than the red windows I find little fault with the car. 

Though Fish'd & Chip'd is a British car, the hot rod paint scheme just screamed for a set of mag rims.  I happened to have some Johnny Lightning wheels with some mag rims and after making some new axles she is rolling in style.

I plan on swapping out the windows at the earliest opportunity, but until then, what do you think?

Sunday, February 26, 2012

Get Blown Away by the Lamborghini Aventador

The 2012 Hot Wheels line-up sees the addition of Lamborghini's new flagship the Aventador LP700-4.


Lamborghini unveiled its latest supercar in 2011 and the Aventador went on to be named Top Gear's car of the year.


The Aventador takes styling ques from both the Reventón LE and the Estoque concept.  I am a big fan of the Reventón's stealthy futuristic looks so I found this to be quite appealing.


Stuffed in the midsection is the massive 6.5 liter V12 that cranks out 691 brake horse power and a 7-speed semi-automatic transmission.  For a four-wheel drive car that weighs only 3,470 lb (1,575 kg) this rockets the Aventador down the track from 0-60 in only 2.9 seconds and gives it a top speed of 217mph.


While I am not sure if I like the Aventador more or less than the Reventón I can say that it is a welcome addition to the Lamborghini family and my die-cast collection.

Friday, February 24, 2012

F-150 Redemption

After my deflating fail with my new 1997 Ford F-150 I decided that I had to put the custom axles I had just made to good use.  That could only mean one thing.  I needed to find another truck with the same track width.  As it happens I had one more F-150 lying around from a graffiti 5-pack.  Well, I am happy to report that this time things went smoothly.  Let me know what you think.